Leviton OSS10-IDA Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 1200 sq. ft. Coverage, LED Adjustable Night Light, Manual On, Almond

From the Manufacturer The Designer occupancy sensor wall switch with LED nightlight is designed to provide occupancy detection with a guide light/nightlight all in one clean, attractive wall switch device. The nightlight automatically illuminates based on the ambient level of light present in the space providing a comfortable, low level of light that helps guide the occupant without activating general lighting. It operates separately from the lighting load controlled by the occupancy sensor. The passive infrared (PIR) sensor detects motion from a heat emitting source within its field-of-view to automatically switch lights on and off (OSSNL) or manually switch lights on and automatically switch lights off (OSS10). Offering the same performance features as the odds family of occupancy sensors. Both models have the ability to reduce (dim) and turn off the luminance of the "guide light" function with a simple dial setting. The LED nightlight consumes less than one half of a watt providing energy savings and guide lighting when room lights are off. The controlled lights will remain on until no motion is detected and the scheduled time-delay has expired. The LED nightlight operates separately from the controlled lights and will turn on via a photocell when the ambient light in the space is approximately less than 1 foot-candle and turn off when the ambient light exceeds 5 foot-candles. The LED nightlight is adjustable for continuous mode or dimmed mode. In the dimmed mode the LED dims to approximately 5 percent of full brightness after 2 minutes of no occupancy. When in the manual on switch mode, the LED nightlight will go to full brightness per the adjustable setting when occupancy is detected and the ambient light level to the photocell is less than 1 foot-candle. Manual on only (30min max time delay), 800w@120v INC 1200VA@120v 2700VA@277V FL, 120-277VAC 60Hz, single-pole, 180-degree, 1200 sq. ft. coverage. Wall Plate not included with Occupancy Sensors.

• LED Nightlight offers "Guide Light" functionality with an adjustable illumination and a setting for either continuous or dimmed mode
• Proprietary segmented (vandal-resistant) Fresnel lens provides optimum sensitivity and performance, designed with an extensive "small motion" area where even slight body movements will be detected
• Horizontal field-of-view may be adjusted between 180 degrees and 32 degrees of arc by using patented integral blinders located on either side of the lens.
• For use in conference rooms, classrooms, small offices, lounges, hotel/hospital/office restrooms
• Manual delayed-off time settings: 30 seconds test mode, 10, 20 and 30 minutes & Manual ON/Auto OFF operation for CEC Title 24 Compliance